10G SFP+ CWDM LR Extended ~10 km / 10 dB, 1270 nm - 1610 nm, LC-Duplex

Universal SFP+ Transceiver - CWDM
Use FLEXBOX to configure to almost any vendor
CWDM for multiple applications over one duplex fiber
For 10GBASE-LR Ethernet links
Supported Data Rates: 614 Mbit/s - 11.3 Gbit/s
Powerbudget of 10 dB for up to 10 km using an OS2 ITU-T G.652 fiber
Operating Temperature from -20°C to 75°C
Specs
  • CWDM
  • ~10 km / 10 dB
  • 11.3 G
  • Industrial
Protocols
  • 10G ETH
  • 10G FC
  • 1G ETH
  • 1G FC
  • 2G FC
  • 4G FC
  • 8G FC
  • CPRI
  • OBSAI
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Part number
P.1696.10.x.I
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor SFP+
Connector / Polish LC-Duplex PC
Interface CWDM
Type CWDM LR
Distance 10 km
Temperature Range -20°C - 75°C
Bandwidth 614 Mbit/s - 11.3 Gbit/s
Digital Diagnostic Management (DDM) Internally Calibrated
Power Consumption 1.2 W
CDR none
Inbuilt FEC No
Powerbudget (dB) 10 dB
Transmit min/max per lane -5 dBm / 0 dBm
Receiver min/max per lane -15 dBm / 0.5 dBm (overload)
Wavelength TX (Typical) Channel R - 1610 nm
Wavelength RX (Range) 1260 - 1620 nm
Laser DFB
Receiver Type PIN
Modulation NRZ
Transmit and Dispersion Penalty 2 dB
Chromatic Dispersion Tolerance 0 ps/nm to 180 ps/nm
Extinction Ratio 3.5 dB
Supported Protocols 10G Ethernet, 10G FC, 1G Fibre Channel, 2G Fibre Channel, 4G Fibre Channel, 8G Fibre Channel, Gigabit Ethernet, LTE 0.614G CPRI, LTE 0.768G OBSAI, LTE 1.22G CPRI, LTE 1.536G OBSAI, LTE 2.458G CPRI, LTE 3.072G OBSAI, LTE 4.915G CPRI, LTE 6.144G CPRI, LTE 6.144G OBSAI, LTE 7.373G CPRI, LTE 9.830G CPRI

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • Cisco Systems CWDM-SFP10G-1610 compatible
  • Extreme 10302 compatible
  • Intel E10GSFPLR compatible
  • Juniper EX-SFP-10GE-LR compatible
Your vendor / compatibility is missing?

What customers say

I have my own company, and I work as a network consultant for different customers, especially in the wind turbine business. I am often on turbine sites in the middle of the ocean, where I need a SFP of a certain type/vendor. By using the FLEXOPTIX FLEXBOX, I have solved a very big issue, just by having this tool and some FLEXOPTIX SFP`s in my bag. Then I can solve the issue, and get the site up and running immediately. This saves another trip to site (often by helicopter), and a lot of money and time. I am very exited about this product, and will certainly recommend this product to everybody.

Poul Pedersen Network consultant / Ipwork consult ApS

The flexbox has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the flexbox was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.

Looking forward to keep using the flexbox in the future! :)

Stan van de Klippe Chief Executive Officer-royalehosting.net

First of all, I must salute the both geniously clever and absolutely gorgeous packaging: frankly, my I.T. colleague and I had blinking stars in the eyes when opening the boxes. I had a previous experience with both proprietary and generic transceivers/DAC, and I must admit that your hardware is doing great, everything feels very professional, and thanks to the FLEXBOX, the configuration is super-easy, install the app, insert the transceiver, select model, et voilà! The switches are happy. Thanks for the candy!

Julien BENNET Technical Director / Areal

FLEXBOX made my life a lot easier, adapting to multiple hardware in a breeze. I used fiber/SFP, RJ45/SFP, RJ45-10G/SFP for an esports production with different hardware brands and all of them worked instantly.

Before being a FLEXOPTER I had a lot of trouble communicating with my infrastructure and acquisitions team because of the complexity of compatibility between different brands and models

now I can operate and adapt to each on site production.

Emilio Vargas Production Manager / Liga ACE esports
More