400G Finned-Top OSFP DR4+ with dual CDR 2 km, 4x λ1310 nm, MTP/MPO-8/12 APC, Singlemode
- 4x 1310 nm
- 2 km
- 425 G
- MTP/MPO-8/12
- 100G ETH
- 400G ETH
- 4x 100G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | OSFP |
---|---|
Connector / Polish | MTP/MPO-8/12 APC |
Interface | Singlemode |
Compliance Code | DR4+ |
Distance | 2 km |
Temperature Range | 0°C - 70°C |
Lane Count | 4x (Tx/Rx) |
Bandwidth | 425 Gbit/s |
Bandwith Per Lane | 106.25 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
---|---|
Power Consumption | 12 W |
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | Yes, KP4 |
Powerbudget (dB) | 6.2 dB |
Transmit min/max per lane | -0.2 dBm / 4.2 dBm |
Receiver min/max per lane | -6.4 dBm / 4.5 dBm (overload) @400G |
Wavelength TX (Typical) | 4x 1310 nm |
Wavelength TX (Range) | 1304.5 - 1317.5 nm |
---|---|
Wavelength RX (Typical) | 4x 1310 nm |
Laser | EML |
Receiver Type | PIN |
Modulation | PAM4 @400G |
Transmit and Dispersion Penalty | 3.4 dB |
Extinction Ratio | 3.5 dB |
Supported Protocols | 4x 100G Ethernet, 400G Ethernet, 100G Ethernet |
Configure Transceiver Using Your FLEXSOX
It's that easy to use- Slide your FLEXBOX V4 into your FLEXSOX
- Connect it via USB
- Start our FLEXOPTIX App
- Insert a Universal Transceiver into the corresponding slot
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Arista 3rd_Party OSFP-400G-XDR4-S compatible
- Arista OSFP-400G-XDR4-S compatible
What customers say
I had the chance to flash my first transceiver with the flexbox and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the Flexbox. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my flexbox for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.
The SFPs easily integrated with our existing network equipment, ensuring cross-vendor compatibility. The build quality is very good.
Connecting to the FLEXBOX with an Android phone took only a few seconds, and configuring the SFPs was a breeze. We really liked the ability to configure multiple SFPs at once. Shipping is incredibly fast. Support is friendly, technical and helpful.