2x 400G Finned-Top OSFP FR4 with dual CDR 2 km, λ1272-1332 nm, LC-Duplex, Singlemode
- int. Mux
- 2 km
- 2x 425 G
- LC
- 100G ETH
- 200G ETH
- 2x 400G ETH
- 400G ETH
- 800G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | OSFP |
|---|---|
| Connector / Polish | 2x LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | 2x FR4 |
| Distance | 2 km |
| Temperature Range | 0°C - 70°C |
| Lane Count | 8x (Tx/Rx) |
| Bandwidth | 2x 425 Gbit/s |
| Bandwith Per Lane | 106.25 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
|---|---|
| Power Consumption | 16 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 4.9 dB |
| Transmit min/max per lane | 0.3 dBm / 3.7 dBm |
| Receiver min/max per lane | -4.6 dBm / 3.5 dBm (overload) @400G |
| Wavelength TX (Typical) | 1271.5 nm, 1271.5 nm, 1291.5 nm, 1291.5 nm, 1311.5 nm, 1311.5 nm, 1331.5 nm, 1331.5 nm |
| Wavelength RX (Typical) | 1271.5 nm, 1271.5 nm, 1291.5 nm, 1291.5 nm, 1311.5 nm, 1311.5 nm, 1331.5 nm, 1331.5 nm |
|---|---|
| Laser | EML |
| Receiver Type | PIN |
| Modulation | PAM4 @400G |
| Transmit and Dispersion Penalty | 3.4 dB |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 2x 400G Ethernet, 800G Ethernet, 400G Ethernet, 200G Ethernet, 100G Ethernet |
Configure Transceiver Using Your FLEXSOX
It's that easy to use- Slide your FLEXBOX V4 into your FLEXSOX
- Connect it via USB
- Start our FLEXOPTIX App
- Insert a Universal Transceiver into the corresponding slot
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
I wanted to take a moment to provide some feedback regarding the on-site programming capabilities of your FLEXOPTIX product. I must say that being able to program SFPs on-site according to our specific requirements has been an incredibly valuable feature for our network infrastructure. The convenience and efficiency it offers have exceeded our expectations.
One of the standout benefits we have experienced is the rapid deployment it enables. Being able to respond quickly to changing network needs without having to wait for orders from different vendors has significantly reduced our deployment time. This has improved our operational efficiency and allowed us to be more agile in meeting our organization's evolving demands.
Moreover, the cost savings we have achieved through on-site programming have been remarkable. By eliminating the need to order pre-configured SFPs from various vendors, we have saved on shipping costs, streamlined our inventory management, and bypassed vendor-specific pricing structures. This flexibility has positively impacted our budgeting and overall equipment expenses.
This is simply a brilliant idea and product! Thank you!