2x 200G Finned-Top OSFP GFR4 with dual CDR 2 km, λ1272-1332 nm, Mini-LC, Singlemode
- int. Mux
- 2 km
- 2x 212.5 G
- Mini-LC
- 200G ETH
- 2x 200G ETH
- 400G ETH
Specification
Form Factor | OSFP |
---|---|
Connector / Polish | 2x Mini-LC PC |
Interface | Singlemode |
Compliance Code | 2x GFR4 |
Distance | 2 km |
Temperature Range | 0°C - 70°C |
Lane Count | 8x (Tx/Rx) |
Bandwidth | 2x 41.25 Gbit/s - 2x 212.5 Gbit/s |
Bandwith Per Lane | 10.31 Gbit/s - 53.13 Gbit/s |
---|---|
Digital Diagnostic Management (DDM) | Yes, externally calibrated |
Power Consumption | 13 W |
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 5 dB |
Transmit min/max per lane | -3 dBm / 2.5 dBm |
Receiver min/max per lane | -8 dBm / 2.5 dBm (overload) @200G |
---|---|
Wavelength TX (Typical) | 1271.5 nm, 1271.5 nm, 1291.5 nm, 1291.5 nm, 1311.5 nm, 1311.5 nm, 1331.5 nm, 1331.5 nm |
Wavelength RX (Typical) | 1271.5 nm, 1271.5 nm, 1291.5 nm, 1291.5 nm, 1311.5 nm, 1311.5 nm, 1331.5 nm, 1331.5 nm |
Laser | EML |
Receiver Type | PIN |
Modulation | PAM4 @200G |
Extinction Ratio | 3.5 dB |
Supported Protocols | 2x 200G Ethernet, 400G Ethernet, 200G Ethernet |
Configure Transceiver Using Your FLEXSOX
It's that easy to use- Slide your FLEXBOX V4 into your FLEXSOX
- Connect it via USB
- Start our FLEXOPTIX App
- Insert a Universal Transceiver into the corresponding slot
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
What a great product! FLEXBOX is an incredible help to our organisation that has a zoo of vendors and manufacturers in our data center. It is super easy to use and we can rapidly get a transceiver ready for any of our hardware. Q: How to improve the experience of setting up transceivers in a multivendor environment? A: FLEXBOX.