400G QSFP-DD BiDi SR4 with dual CDR 150 m, 8x 850 / 910 nm, MTP/MPO-8/12, Multimode
- 8x 850 nm
- 150 m
- 425 G
- MTP/MPO-8/12
- 400G ETH
- 50G ETH
Specification
| Form Factor | QSFP-DD |
|---|---|
| Connector / Polish | MTP/MPO-8/12 PC |
| Interface | Multimode BiDi |
| Compliance Code | BiDi SR4 |
| Distance | 150 m |
| Temperature Range | 0°C - 70°C |
| Lane Count | 8x (Tx/Rx) |
| Bandwidth | 425 Gbit/s |
| Bandwith Per Lane | 53.13 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
|---|---|
| Power Consumption | 12 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 2.1 dB |
| Transmit min/max per lane | -4.5 dBm / 3 dBm |
| Receiver min/max per lane | -6.6 dBm / 3 dBm (overload) @400G |
| Wavelength TX (Typical) | 850 nm, 850 nm, 850 nm, 850 nm, 910 nm, 910 nm, 910 nm, 910 nm |
| Wavelength RX (Typical) | 850 nm, 850 nm, 850 nm, 850 nm, 910 nm, 910 nm, 910 nm, 910 nm |
|---|---|
| Laser | VCSEL |
| Receiver Type | PIN |
| Modulation | PAM4 @400G |
| Transmit and Dispersion Penalty | 4.5 dB |
| Extinction Ratio | 3 dB |
| Supported Protocols | 400G Ethernet, 50G Ethernet |
Configure Transceiver Using Your FLEXSOX
It's that easy to use- Slide your FLEXBOX V4 into your FLEXSOX
- Connect it via USB
- Start our FLEXOPTIX App
- Insert a Universal Transceiver into the corresponding slot
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
Woa, i can get next day delivery for any vendor. That’s a game changer. Also thanks for making it a smartphone app, this fits my workflow well.
We use FLEXOPTIX modules for years with different networking hardware. Amazing and very stable products without any issues. Preparing a big network project with several switch vendors it was time to do the next step and order a FLEXBOX. Now we can be much more flexible that before and the provided tools are fast, stable, easy to use and as stable as all other FLEXOPTIX producs. All in all - highest recommendation!
I had the chance to flash my first transceiver with the flexbox and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the Flexbox. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my flexbox for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.