4x 100G QSFP-DD FR with dual CDR 2 km, 4x λ1310 nm, SN-Duplex, Singlemode
Universal QSFP-DD Transceiver
For 100GBASE-FR Ethernet links
Integrated Clock-Data-Recovery (CDR)
PAM4 modulated signal
Supported Data Rates: 4x 106.25 Gbit/s
Up to 2 km via Singlemode OS2
4x SN-Duplex Connector
Specs
- 4x 1310 nm
- 2 km
- 4x 106.25 G
- SN
Protocols
- 100G ETH
- 400G ETH
- 4x 100G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | QSFP-DD |
---|---|
Connector / Polish | 4x SN-Duplex UPC |
Interface | Singlemode |
Compliance Code | 4x FR |
Distance | 2 km |
Temperature Range | 0°C - 70°C |
Lane Count | 4x (Tx/Rx) |
Bandwidth | 4x 106.25 Gbit/s |
Bandwith Per Lane | 106.25 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
---|---|
Power Consumption | 10 W |
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | Yes, KP4 |
Powerbudget (dB) | 4 dB |
Transmit min/max per lane | -2.4 dBm / 4 dBm |
Receiver min/max per lane | -6.4 dBm / 4 dBm (overload) @100G |
Wavelength TX (Typical) | 4x 1310 nm |
Wavelength TX (Range) | 1304.5 - 1317.5 nm |
---|---|
Wavelength RX (Typical) | 4x 1310 nm |
Laser | EML |
Receiver Type | PIN |
Modulation | PAM4 @100G |
Transmit and Dispersion Penalty | 3.4 dB |
Extinction Ratio | 3.5 dB |
Supported Protocols | 4x 100G Ethernet, 400G Ethernet, 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Juniper QDD-4X100G-FR compatible
- Nokia (ex. Alcatel-Lucent) 3HE15271AA compatible
- Nokia Networks 3HE15274AA compatible
Your vendor / compatibility is missing?
What customers say
Everything is build for and runs in the cloud today, the Aviatrix Multicloud solution as well.
Still, we have customers asking for a highperformance encryption from “their” premises to the cloud and this is where our CloudN appliances come into play.
If customers ask us to support the installation of our appliances, we’ll do everything we can to help. And then it’s good to know that if you sneak into a datacenter, you can rely on FLEXOPTIX to even fulfil that connection(s) that are terminating on a device that was missing or has changed in the architecture you discussed before.
Thanks for the brilliant service!
Gerald Buchholz / Principal Solution Architect
Aviatrix
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore.
The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that.
As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
Thomas Verschuren
Technical Consultant, IP Visie Networking B.V.
Very easy to use and quick too. I particularly like the ability to use the same configuration on a number of transceivers just by ticking a box - a real time saver
Mike Dallaway
Mira 2014 Limited
Great. FLEXBOX does what it says on the tin! - just connect, configure Transceiver and be happy.
James Rice
Jump Networks Ltd