2x 2x 100G QSFP-DD IR4 with dual CDR 2 km, λ1296-1309 nm, CS-Duplex, Singlemode
Universal QSFP-DD Transceiver
For 200GBASE-IR4 Ethernet links
Integrated Clock-Data-Recovery (CDR)
Supported Data Rates: 2x 103.12 Gbit/s
Up to 2 km via Singlemode OS2
2x CS-Duplex Connector
Specs
- int. Mux
- 2 km
- 2x 103.12 G
- CS
Protocols
- 100G ETH
- 2x 100G ETH
-
Alternatives
-
Matching Products
Part number
D.161HG2.2:Sx
Your price
As low as
2,477.13 EUR
List price
Your price
As low as
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.
Just go to cart and click CREATE QUOTE.
-
Alternatives
-
Matching Products
Specification
Form Factor | QSFP-DD |
---|---|
Connector / Polish | 2x CS-Duplex UPC |
Interface | Singlemode |
Type | 2x IR4 |
Distance | 2 km |
Temperature Range | 0°C - 70°C |
Lane Count | 8x (Tx/Rx) |
Bandwidth | 2x 103.12 Gbit/s |
Bandwith Per Lane | 25.78 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
---|---|
Power Consumption | 5 W |
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 2.5 dB |
Transmit min/max per lane | -4.3 dBm / 4.5 dBm |
Receiver min/max per lane | -6.8 dBm / 4.5 dBm (overload) |
Wavelength TX (Typical) | 1295.6 nm, 1295.6 nm, 1300 nm, 1300 nm, 1304.6 nm, 1304.6 nm, 1309.1 nm, 1309.1 nm |
Wavelength RX (Typical) | 1295.6 nm, 1295.6 nm, 1300 nm, 1300 nm, 1304.6 nm, 1304.6 nm, 1309.1 nm, 1309.1 nm |
---|---|
Laser | DFB |
Receiver Type | PIN |
Modulation | NRZ |
Transmit and Dispersion Penalty | 2.2 dB |
Extinction Ratio | 4 dB |
Supported Protocols | 2x 100G Ethernet, 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
Your vendor / compatibility is missing?
What customers say
Extensive list of supported vendors.
Your product is like a Swiss Army Knife that all Engineers should have!!
Great Job and keep it up!
Fahad Dalwai
Network Engineer, Abdulaziz Abdulmohsin Al-Rashed Sons Co. W.L.L.
The FLEXBOX allows us to use 100MBit/s to multi-gigabit transceivers in our product for a wide range of customer needs. We can not solve them without this magic box!
Klaus Degner
Managing Director, Allegro Packets GmbH
Everything is build for and runs in the cloud today, the Aviatrix Multicloud solution as well.
Still, we have customers asking for a highperformance encryption from “their” premises to the cloud and this is where our CloudN appliances come into play.
If customers ask us to support the installation of our appliances, we’ll do everything we can to help. And then it’s good to know that if you sneak into a datacenter, you can rely on FLEXOPTIX to even fulfil that connection(s) that are terminating on a device that was missing or has changed in the architecture you discussed before.
Thanks for the brilliant service!
Gerald Buchholz / Principal Solution Architect
Aviatrix
We use “FLEXBOX” and “FLEXOPTIX” for a few years now. Since then life is much easier. And even saved me sometimes in the middle of the night. Need a special vendor or type, plug it in, program, and done. Very… but very occasionally a compatibility is not present in the system. Just drop a e-mail to support with your needs to get an immediate response from “JIRA – the flexoptix robot” and your compatibility is added to your FLEXBOX within 24 hours. Just awesome!!
Nick Derksen
Infrastructure Engineer, Previder B.V