2x 2x 100G QSFP-DD CWDM4 with dual CDR 2 km, λ1270-1330 nm, CS-Duplex, Singlemode

Universal QSFP-DD Transceiver
Use FLEXBOX in combination with FLEXSOX to configure to almost any vendor
For 200GBASE-CWDM4 Ethernet links
Integrated Clock-Data-Recovery (CDR)
Supported Data Rates: 2x 103.12 Gbit/s
Up to 2 km via Singlemode OS2
2x CS-Duplex Connector
Specs
  • int. Mux
  • 2 km
  • 2x 103.12 G
  • CS
Protocols
  • 100G ETH
  • 2x 100G ETH
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Part number
D.161HG2.2.C:Sx
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor QSFP-DD
Connector / Polish 2x CS-Duplex UPC
Interface Singlemode
Type 2x CWDM4
Distance 2 km
Temperature Range 0°C - 70°C
Lane Count 8x (Tx/Rx)
Bandwidth 2x 103.12 Gbit/s
Bandwith Per Lane 25.78 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 3 W
CDR TX and RX
SGMII No
Inbuilt FEC No
Powerbudget (dB) 3.3 dB
Transmit min/max per lane -4 dBm / 2.5 dBm
Receiver min/max per lane -7.3 dBm / 2.5 dBm (overload)
Wavelength TX (Typical) 1270 nm, 1270 nm, 1290 nm, 1290 nm, 1310 nm, 1310 nm, 1330 nm, 1330 nm
Wavelength RX (Typical) 1270 nm, 1270 nm, 1290 nm, 1290 nm, 1310 nm, 1310 nm, 1330 nm, 1330 nm
Laser DFB
Receiver Type PIN
Modulation NRZ
Transmit and Dispersion Penalty 3 dB
Extinction Ratio 3.5 dB
Supported Protocols 2x 100G Ethernet, 100G Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
Your vendor / compatibility is missing?

What customers say

FLEXBOX allows us to reduce the amount of spare transceivers we keep for our diverse hardware systems, thereby keeping overall cost low.
Sven Gebhardt Head of Platforms & Services, grandcentrix GmbH

I wanted to take a moment to provide some feedback regarding the on-site programming capabilities of your FLEXOPTIX product. I must say that being able to program SFPs on-site according to our specific requirements has been an incredibly valuable feature for our network infrastructure. The convenience and efficiency it offers have exceeded our expectations.

One of the standout benefits we have experienced is the rapid deployment it enables. Being able to respond quickly to changing network needs without having to wait for orders from different vendors has significantly reduced our deployment time. This has improved our operational efficiency and allowed us to be more agile in meeting our organization's evolving demands.

Moreover, the cost savings we have achieved through on-site programming have been remarkable. By eliminating the need to order pre-configured SFPs from various vendors, we have saved on shipping costs, streamlined our inventory management, and bypassed vendor-specific pricing structures. This flexibility has positively impacted our budgeting and overall equipment expenses.

This is simply a brilliant idea and product! Thank you!

Michal Szarecki IT Engineer/ pmitsolutions.ie
I have received my orders from them in blistering speed. Happy to the nth degree.
Pat Cluney  Senior Technical Officer, Waterford Institute of Technology

We are realy happy with the FLEXBOX, programming FLEXOPTIX universal transceivers works like a charm.
Just insert, detect, select and start programming, now we are able to support hundreds off vendors with just a few standard SFP modules.
Amazing smart solution!

Stefan van Merriënboer Senior ICT Consultant / Effisol
More