2x 100G QSFP-DD LR4 with dual CDR 10 km, λ1296-1309 nm, CS-Duplex, Singlemode

Universal QSFP-DD Transceiver
Use FLEXBOX in combination with FLEXSOX to configure to almost any vendor
For 100GBASE-LR4 Ethernet links
Integrated Clock-Data-Recovery (CDR)
Supported Data Rates: 2x 103.12 Gbit/s
Up to 10 km via Singlemode OS2
2x CS-Duplex Connector
Specs
  • int. Mux
  • 10 km
  • 2x 103.12 G
  • CS
Protocols
  • 100G ETH
  • 200G ETH
  • 2x 100G ETH
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
D.161HG2.10:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

  • Matching Products

Lower Power Budget
2x 100G QSFP-DD IR4 with dual CDR 2 km, λ1296-1309 nm, CS-Duplex, Singlemode 
2x 100G QSFP-DD IR4 with dual CDR | 2 km, λ1296-1309 nm, CS-Duplex, Singlemode
0 pcs in stock As low as 2,477.13 EUR
CS-Duplex to LC-Duplex Singlemode cable A1 9/125 µm, yellow, 0.5 m - 100 m 
CS-Duplex to LC-Duplex Singlemode cable | A1 9/125 µm, yellow, 0.5 m - 100 m
As low as 32.44 EUR
CS-Duplex to CS-Duplex Singlemode cable A1 9/125 µm, yellow, 0.5 m - 100 m 
CS-Duplex to CS-Duplex Singlemode cable | A1 9/125 µm, yellow, 0.5 m - 100 m
As low as 70.56 EUR

Specification

Form Factor QSFP-DD
Connector / Polish 2x CS-Duplex UPC
Interface Singlemode
Compliance Code 2x LR4
Distance 10 km
Temperature Range 0°C - 70°C
Lane Count 8x (Tx/Rx)
Bandwidth 2x 103.12 Gbit/s
Bandwith Per Lane 25.78 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 8 W
CDR TX and RX
SGMII No
Inbuilt FEC No
Powerbudget (dB) 5.5 dB
Transmit min/max per lane -1.3 dBm / 4.5 dBm
Receiver min/max per lane -6.8 dBm / 4.5 dBm (overload) @100G
Wavelength TX (Typical) 1295.6 nm, 1295.6 nm, 1300 nm, 1300 nm, 1304.6 nm, 1304.6 nm, 1309.1 nm, 1309.1 nm
Wavelength RX (Typical) 1295.6 nm, 1295.6 nm, 1300 nm, 1300 nm, 1304.6 nm, 1304.6 nm, 1309.1 nm, 1309.1 nm
Laser DFB
Receiver Type PIN
Modulation NRZ @100G
Transmit and Dispersion Penalty 2.2 dB
Extinction Ratio 4 dB
Supported Protocols 2x 100G Ethernet, 200G Ethernet, 100G Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • Juniper QDD-2X100G-LR4 compatible
  • Nokia (ex. Alcatel-Lucent) 3HE14002AA compatible
Your vendor / compatibility is missing?

What customers say

Great products. When you hold them in your hands, you see the care for qualitiy and product details. I strongly recommend Flexoptix' products.
Dariusz Siedlecki Nettec

We are realy happy with the FLEXBOX, programming FLEXOPTIX universal transceivers works like a charm.
Just insert, detect, select and start programming, now we are able to support hundreds off vendors with just a few standard SFP modules.
Amazing smart solution!

Stefan van Merriënboer Senior ICT Consultant / Effisol

I personally did not know FLEXOPTIX yet, but since I got in contact with it the first time, I do not want to miss it anymore. Very good product. I like the ability to program them to vendor specific SFPs which are recognized as they would be original ones. If the hardware behind changes I can simply change the SFPs to new vendor specific ones.

Thank you for such a great product.

Stefan Kirbes System Administrator / INTERCOM Austria GmbH

I have my own company, and I work as a network consultant for different customers, especially in the wind turbine business. I am often on turbine sites in the middle of the ocean, where I need a SFP of a certain type/vendor. By using the FLEXOPTIX FLEXBOX, I have solved a very big issue, just by having this tool and some FLEXOPTIX SFP`s in my bag. Then I can solve the issue, and get the site up and running immediately. This saves another trip to site (often by helicopter), and a lot of money and time. I am very exited about this product, and will certainly recommend this product to everybody.

Poul Pedersen Network consultant / Ipwork consult ApS
More