100G CFP LR4 with dual CDR 20 km, λ1296-1309 nm, LC-Duplex, Singlemode
- int. Mux
- 20 km
- 103.12 G
- 100G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | CFP |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | Singlemode |
Compliance Code | LR4 |
Distance | 20 km |
Temperature Range | 0°C - 70°C |
Lane Count | 4x (Tx/Rx) |
Bandwidth | 103.12 Gbit/s |
Bandwith Per Lane | 25.78 Gbit/s |
---|---|
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
Power Consumption | 16 W |
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 9.6 dB |
Transmit min/max per lane | -1 dBm / 4.5 dBm |
Receiver min/max per lane | -10.6 dBm / 4.5 dBm (overload) @100G |
---|---|
Wavelength TX (Typical) | 1295.56 nm, 1300.05 nm, 1304.58 nm, 1309.14 nm |
Wavelength RX (Typical) | 1295.56 nm, 1300.05 nm, 1304.58 nm, 1309.14 nm |
Laser | EML |
Receiver Type | PIN |
Modulation | NRZ @100G |
Extinction Ratio | 7 dB |
Supported Protocols | 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADVA 1061700655-01 compatible
- Brocade / Ruckus 100G-CFP-LR4-10KM compatible
- Ciena (ex. Nortel) NTTA03BJE6 compatible
- Huawei CFP-100G-LR4 compatible
- Huawei OSN010N04 compatible
- Juniper CFP-100GBASE-LR4 compatible
- Juniper CFP-GEN2-100GBASE-LR4 compatible
- Juniper SRX-CFP-100G-LR4 compatible
- Keysight (ex. Ixia) CSM1310 compatible
- MRV CFP-100GE-LR4 compatible
- Net Insight NPA0118-LR04 compatible
- Packetlight CFP-LR4-1103 compatible
What customers say
I had the chance to flash my first transceiver with the flexbox and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the Flexbox. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my flexbox for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.