10G XFP ER Industrial with dual CDR 40 km, λ1330 nm, LC-Duplex, Singlemode

Universal XFP Transceiver
Use FLEXBOX to configure to almost any vendor
For 10GBASE-ER Ethernet links
Integrated Clock-Data-Recovery (CDR)
Supported Data Rates: 9.95 Gbit/s - 11.3 Gbit/s
Up to 40 km via Singlemode OS2
LC-Duplex Connector
Operating Temperature from -40°C to 85°C
Specs
  • 1330 nm
  • 40 km
  • 11.3 G
  • Industrial
Protocols
  • 10G ETH
  • 10G FC
  • OTU2
  • STM-64
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Part number
X.B1696.40.DAI:Sx
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor XFP
Connector / Polish LC-Duplex PC
Interface Singlemode
Type ER
Distance 40 km
Temperature Range -40°C - 85°C
Bandwidth 9.95 Gbit/s - 11.3 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 2 W
CDR TX and RX
SGMII No
Inbuilt FEC No
Powerbudget (dB) 16 dB
Transmit min/max per lane 1 dBm / 5 dBm
Receiver min/max per lane -15 dBm / 0.5 dBm (overload)
Wavelength TX (Typical) 1330 nm
Wavelength TX (Range) 1320 - 1340 nm
Wavelength RX (Typical) 1270 nm
Wavelength RX (Range) 1260 - 1280 nm
Laser DFB
Receiver Type PIN
Modulation NRZ
Extinction Ratio 3.5 dB
Supported Protocols 10G Ethernet, 10G FC, OTU2, STM-64

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • Cisco Systems XFP-10GER-192IR+ compatible
Your vendor / compatibility is missing?

What customers say

Definitely, FLEXOPTIX will be my optics supplier from today. The ability to compatibilize optics across multiple vendors is going to save us from many headaches. The FLEXBOX is a must for any company using optical network equipment.
Miguel Bérniz Chief Technical Officer, GibFibre Ltd
The FLEXBOX is really a great tool. It allows me to quickly re-configure transceivers. Nice additional feature is the "Power Meter & Source" tool. It allows, without additional hardware, a quick check of optical transceivers, fiber cables, fiber connections etc.
René Oskar Kühne Retired scientist, now acting in the field of IT support, R.O. Kuehne
The flashing is very quick and you can configure it to flash multiple devices in a row. Definitely well worth it.
Adam Montgomery Necto Inc

The flexbox has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the flexbox was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.

Looking forward to keep using the flexbox in the future! :)

Stan van de Klippe Chief Executive Officer-royalehosting.net
More