10G XFP BiDi ER with dual CDR 40 km, ᵀˣ1330 / ᴿˣ1270 nm, LC-Simplex, Singlemode

Universal XFP BiDi Transceiver
Use FLEXBOX to configure to almost any vendor
Double your bandwith by using only one fiber for transmit and receive
For 10GBASE-ER Ethernet links
Integrated Clock-Data-Recovery (CDR)
Supported Data Rates: 8.5 Gbit/s - 11.1 Gbit/s
Up to 40 km via Singlemode OS2
LC-Simplex Connector
Specs
  • 1330 nm
  • 40 km
  • 11.1 G
  • BiDi
Protocols
  • 10G ETH
  • 10G FC
  • 8G FC
  • OTU2
  • STM-64
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Part number
X.B1696.40.DA:Sx
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor XFP
Connector / Polish LC-Simplex UPC
Interface Singlemode BiDi
Type BiDi ER
Distance 40 km
Temperature Range 0°C - 70°C
Bandwidth 8.5 Gbit/s - 11.1 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 3.5 W
CDR TX and RX
SGMII No
Inbuilt FEC No
Powerbudget (dB) 16 dB
Transmit min/max per lane 1 dBm / 5 dBm
Receiver min/max per lane -15 dBm / 0.5 dBm (overload)
Wavelength TX (Typical) 1330 nm
Wavelength TX (Range) 1320 - 1340 nm
Wavelength RX (Typical) 1270 nm
Wavelength RX (Range) 1260 - 1280 nm
Laser DFB
Receiver Type PIN
Modulation NRZ
Extinction Ratio 3.5 dB
Supported Protocols 10G Ethernet, 10G FC, 8G Fibre Channel, OTU2, STM-64

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • ADVA 1061701894-01 compatible
  • Allied Telesis # 13536 compatible
  • Avaya (ex. Nortel) # 13537 compatible
  • Brocade / Ruckus 10G-XFP-ER compatible
  • Ciena (ex. Nortel) NTTP80DA compatible
  • Cisco Systems XFP-10GER-192IR+ compatible
  • Dell (ex. Force10) # 13540 compatible
  • Extreme (ex. Enterasys) 10GBASE-ER-XFP compatible
  • Extreme 10124 compatible
  • Fortinet FG-TRAN-XFPLR compatible
  • H3C (ex. 3COM) 3CXFP96 compatible
  • Hirschmann # 13541 compatible
  • Hitachi # 13542 compatible
  • HP H3C # 13543 compatible
  • Huawei OSX040B00 compatible
  • Juniper (ex BTI Systems) # 13538 compatible
  • Juniper XFP-10GE-ER compatible
  • LevelOne # 13545 compatible
  • MikroTik # 13546 compatible
  • Moxa # 13547 compatible
  • MRV # 13548 compatible
  • Net Insight NPA0038-SR11 compatible
  • Nokia (ex. Alcatel-Lucent) 1AB217280001 compatible
  • Nokia (ex. Alcatel-Lucent) 3HE05832CA compatible
  • Nokia Siemens Networks V50017-U772-K500 compatible
  • Palo Alto Networks # 13549 compatible
  • Radware # 13550 compatible
  • Ribbon (ex. ECI) OTR64_L33BD compatible
  • Telco Systems BTI-XFP-XBD40L-DD-33/27S compatible
Your vendor / compatibility is missing?

What customers say

Ordering and using FLEXOPTIX transceivers was far quicker than even getting a quote from traditional vendors. Using the FLEXBOX is super easy and fast - 5 minutes to get transceivers ready including unboxing and enjoying packaged marshmallows.
Bronislav Robenek Network Architect, Cloud4com

FLEXBOX made my life a lot easier, adapting to multiple hardware in a breeze. I used fiber/SFP, RJ45/SFP, RJ45-10G/SFP for an esports production with different hardware brands and all of them worked instantly.

Before being a FLEXOPTER I had a lot of trouble communicating with my infrastructure and acquisitions team because of the complexity of compatibility between different brands and models

now I can operate and adapt to each on site production.

Emilio Vargas Production Manager / Liga ACE esports

The new FLEXOPTIX 400GBASE-ZR modules are lit. We’ve been running a few of them in production and they just work. Awesome support from FLEXOPTIX. Keep up the good work!

Viktor Ekmark Cloud Infrastructure Engineer / Elastx AB
Before we knew FLEXOPTIX, we always stocked various types of transceivers from different brands. Now, several years later, we have completely switched to FLEXOPTIX's universal transceivers since we can simply brand these ourselves using the FLEXBOX. Along with their broad product range and very fast shipping, they are an awesome company to deal with!
Jeffrey Bosma XS News , Sr. System & Network Engineer
More