10G XFP BiDi ER with dual CDR 40 km, ᵀˣ1270 / ᴿˣ1330 nm, LC-Simplex, Singlemode
- 1270 nm
- 40 km
- 11.1 G
- BiDi
- 10G ETH
- 10G FC
- 8G FC
- OTU2
- STM-64
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | XFP |
|---|---|
| Connector / Polish | LC-Simplex UPC |
| Interface | Singlemode BiDi |
| Compliance Code | BiDi ER |
| Distance | 40 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 8.5 Gbit/s - 11.1 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 3.5 W |
|---|---|
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 16 dB |
| Transmit min/max per lane | 1 dBm / 5 dBm |
| Receiver min/max per lane | -15 dBm / 0.5 dBm (overload) @10G |
| Wavelength TX (Typical) | 1270 nm |
| Wavelength TX (Range) | 1260 - 1280 nm |
|---|---|
| Wavelength RX (Typical) | 1330 nm |
| Wavelength RX (Range) | 1320 - 1340 nm |
| Laser | DFB |
| Receiver Type | PIN |
| Modulation | NRZ @10G |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 10G Ethernet, 10G FC, 8G Fibre Channel, OTU2, STM-64 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADVA 1061701893-01 compatible
- Allied Telesis # 13516 compatible
- Avaya (ex. Nortel) # 13517 compatible
- Brocade / Ruckus 10G-XFP-ER compatible
- Ciena (ex. Nortel) NTTP80DA compatible
- Cisco Systems XFP-10GER-192IR+ compatible
- Dell (ex. Force10) # 13520 compatible
- Extreme (ex. Enterasys) 10GBASE-ER-XFP compatible
- Extreme 10124 compatible
- Fortinet FG-TRAN-XFPLR compatible
- H3C (ex. 3COM) 3CXFP96 compatible
- Hirschmann # 13521 compatible
- Hitachi # 13522 compatible
- HP H3C # 13523 compatible
- Huawei OSX040B01 compatible
- Juniper (ex BTI Systems) # 13518 compatible
- Juniper XFP-10GE-ER compatible
- LevelOne # 13526 compatible
- MikroTik # 13527 compatible
- Moxa # 13528 compatible
- MRV # 13529 compatible
- Net Insight NPA0038-SR11 compatible
- Nokia (ex. Alcatel-Lucent) 1AB217280001 compatible
- Nokia (ex. Alcatel-Lucent) 3HE05832CA compatible
- Nokia Siemens Networks V50017-U772-K500 compatible
- Palo Alto Networks # 13530 compatible
- Radware # 13531 compatible
- Ribbon (ex. ECI) OTR64_L27BD compatible
- Telco Systems BTI-XFP-XBD40L-DD-27/33S compatible
What customers say
We heard about FLEXOPTIX for the quality of its FLEXBOX and optics.
We were able to acquire a FLEXBOX to help out our customers. The quality of the product leaves us speechless. We are immediately going to change optics supplier to FLEXOPTIX. The quality is excellent.
We are realy happy with the FLEXBOX, programming FLEXOPTIX universal transceivers works like a charm.
Just insert, detect, select and start programming, now we are able to support hundreds off vendors with just a few standard SFP modules.
Amazing smart solution!
What a great product! FLEXBOX is an incredible help to our organisation that has a zoo of vendors and manufacturers in our data center. It is super easy to use and we can rapidly get a transceiver ready for any of our hardware. Q: How to improve the experience of setting up transceivers in a multivendor environment? A: FLEXBOX.