10G XFP SR with dual CDR 300 m, λ850 nm, LC-Duplex, Multimode
XFP
SR
Universal XFP Transceiver
Use FLEXBOX to configure to almost any vendor
For 10GBASE-SR Ethernet links
Integrated Clock-Data-Recovery (CDR)
Supported Data Rates: 8.5 Gbit/s - 11.1 Gbit/s
Up to 300 m via Multimode OM3
LC-Duplex Connector
Specs
- 850 nm
- 300 m
- 11.1 G
Protocols
- 10G ETH
- 10G FC
- 8G FC
- STM-64
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | XFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Multimode |
| Compliance Code | SR |
| Distance | 300 m |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 8.5 Gbit/s - 11.1 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 3.5 W |
|---|---|
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 3.8 dB |
| Transmit min/max per lane | -7.3 dBm / -1 dBm |
| Receiver min/max per lane | -11.1 dBm / 1 dBm (overload) @10G |
| Wavelength TX (Typical) | 850 nm |
| Wavelength TX (Range) | 840 - 860 nm |
|---|---|
| Wavelength RX (Typical) | 850 nm |
| Wavelength RX (Range) | 840 - 860 nm |
| Laser | VCSEL |
| Receiver Type | PIN |
| Modulation | NRZ @10G |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 10G Ethernet, 10G FC, 8G Fibre Channel, STM-64 |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- MSA Standard (8G) compatible
- ADTRAN 1442901G1 compatible
- ADVA 0061701825 compatible
- ADVA 0061701825-02 compatible
- ADVA 1061701837-01 compatible
- ADVA 1061701837-02 compatible
- Alcatel-Lucent Ent. 3HE00566AA compatible
- Allied Telesis AT-XPSR compatible
- Arris 722873 compatible
- Avaya (ex. Nortel) AA1403005-E5 compatible
- Brocade / Ruckus 10G-XFP-SR compatible
- Calix 100-01629 compatible
- Ciena (ex. Nortel) NTTP81AA compatible
- Ciena (ex. Nortel) NTTP86AA compatible
- Ciena XCVR-000Z85 compatible
- Cisco Systems ONS-XC-10G-SR-MM compatible
- Cisco Systems XFP-10G-MM-SR compatible
- Citrix Netscaler EW3F0000713 compatible
- Cyan 280-0056-00 compatible
- D-LINK DEM-421XT compatible
- Dell (ex. Force10) GP-XFP-1S compatible
- Edge Core ET5302-SR compatible
- Extreme (ex. Enterasys) 10GBASE-SR-XFP compatible
- Extreme 10121 compatible
- F5 Networks OPT-0012 compatible
- Fortinet FG-TRAN-XFP-SR compatible
- Fujitsu S26361-F3206-E10 compatible
- H3C (ex. 3COM) 3CXFP94 compatible
- Hirschmann M-XFP SR/LC compatible
- Hitachi 10GBASE-SR compatible
- HP H3C JD117B compatible
- Huawei XFP-10G-MM850 compatible
- Huawei XFP-SX-MM850 compatible
- Infinera (ex. Transmode) TRX100029 compatible
- Infinera (ex. Transmode) TRX100077 compatible
- Juniper (ex BTI Systems) BP3AM4SS compatible
- Juniper EX-XFP-10GE-SR compatible
- Juniper NS-SYS-GBIC-MXSR compatible
- Juniper SRX-XFP-10GE-SR compatible
- Juniper XFP-10G-S compatible
- Keysight (ex. Ixia) XMM850-E compatible
- LevelOne XFP-5901 compatible
- Marconi SU58BA compatible
- McAfee IAC-X850-CG1A compatible
- MikroTik # 13405 compatible
- Moxa # 13406 compatible
- MRV XFP-10GD-SX compatible
- Myricom 10G-XFP-SR compatible
- Netgear AXM751 compatible
- NetOptics XFPKT-50SR compatible
- Netscout 321-1279 compatible
- Niveo N10GMM compatible
- Nokia (ex. Alcatel-Lucent) 3FE50712AA compatible
- Nokia (ex. Alcatel-Lucent) 3HE00566CA compatible
- Nokia Siemens Networks V50017-U770-K500 compatible
- Packetlight SL102 compatible
- Palo Alto Networks PAN-XFP-SR compatible
- Perle PXFP-10GD-M2LC008 compatible
- RAD XFP-4D compatible
- Radware 9062096 compatible
- Redback OIM-SXFP-10GE-SR compatible
- Ribbon (ex. ECI) OTFC8_MM compatible
- Ribbon (ex. ECI) OTR103_SR compatible
- Sandvine 100-00159 compatible
- Sorrento Networks GMXFP-10G-MM compatible
- Supermicro XFP SR compatible
- Telco Systems BTI-10GSR-DD-XFP compatible
- Transition Networks TN-XFP-SR compatible
- Trend Micro (ex. TippingPoint) JC011A compatible
- Viavi (ex. JDSU) PLRXXL-SC-S43-C1 compatible
- VSS monitoring VX_00015 compatible
- Waystream (ex. Packetfront) XFP-10GE-SR compatible
- Zyxel XFP-SR compatible
Your vendor / compatibility is missing?
What customers say
The flexbox has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the flexbox was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.
Looking forward to keep using the flexbox in the future! :)
Stan van de Klippe
Chief Executive Officer-royalehosting.net
In our test environment we use the optics over and over in many devices. Programming optics with the FLEXBOX is as easy as 1,2,3!
Erwin ter Hofstede
CEO, EC-Hosting
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore.
The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that.
As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
Thomas Verschuren
Technical Consultant, IP Visie Networking B.V.
FLEXOPTIX creates overall great and reliable products. We need optics for multiple vendors and with the FLEXBOX we are able to simplify our spare part handling.
The best part of the FLEXBOX are the Linux drivers and therefore no need for any additional OS just for branding optics.
Dominik Grueber
Hetzner Online GmbH / Network Administrations