10G XFP LR with dual CDR 20 km, λ1310 nm, LC-Duplex, Singlemode

Universal XFP Transceiver
Use FLEXBOX to configure to almost any vendor
For 10GBASE-LR Ethernet links
Integrated Clock-Data-Recovery (CDR)
Supported Data Rates: 9.95 Gbit/s - 10.3 Gbit/s
Up to 20 km via Singlemode OS2
LC-Duplex Connector
Specs
  • 1310 nm
  • 20 km
  • 10.3 G
Protocols
  • 10G ETH
  • 10G FC
  • STM-64
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Part number
X.1396.20:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor XFP
Connector / Polish LC-Duplex PC
Interface Singlemode
Compliance Code LR
Distance 20 km
Temperature Range 0°C - 70°C
Bandwidth 9.95 Gbit/s - 10.3 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 3.5 W
CDR TX and RX
SGMII No
Inbuilt FEC No
Powerbudget (dB) 11 dB
Transmit min/max per lane -3 dBm / 2 dBm
Receiver min/max per lane -14 dBm / 0.5 dBm (overload) @10G
Wavelength TX (Typical) 1310 nm
Wavelength TX (Range) 1290 - 1330 nm
Wavelength RX (Typical) 1310 nm
Wavelength RX (Range) 1270 - 1600 nm
Laser DFB
Receiver Type PIN
Modulation NRZ @10G
Extinction Ratio 6 dB
Supported Protocols 10G Ethernet, 10G FC, STM-64

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • MSA Standard (8G) compatible
  • ADTRAN 1442920G1 compatible
  • ADVA 0061701811-03 compatible
  • ADVA 1061701833-02 (8G) compatible
  • Allied Telesis AT-XPLR compatible
  • Avaya (ex. Nortel) AA1403001-E5 compatible
  • Cisco Systems XFP-10GLR-OC192SR compatible
  • Cyan 280-0014-00 compatible
  • Dell (ex. Force10) GP-XFP-1L compatible
  • Extreme (ex. Enterasys) 10GBASE-LR-XFP compatible
  • Extreme 10122 compatible
  • H3C (ex. 3COM) 3CXFP92 compatible
  • Hirschmann M-XFP-LR/LC compatible
  • Hitachi 10GBASE-LR compatible
  • HP H3C JD108B compatible
  • Huawei XFP-STM64-LX-SM1310 compatible
  • Infinera (ex. Transmode) TRX100044 compatible
  • Juniper (ex BTI Systems) BP3AM4MS compatible
  • Juniper XFP-10G-L-OC192-SR1 compatible
  • Keysight (ex. Ixia) XSM1310 compatible
  • LevelOne XFP-5211 compatible
  • MikroTik # 11954 compatible
  • Moxa # 11955 compatible
  • MRV XFP-10GD-LR compatible
  • NetOptics XFPKT-LR compatible
  • Nokia (ex. Alcatel-Lucent) 1AB214540001 compatible
  • Nokia (ex. Alcatel-Lucent) 3FE50712BA compatible
  • Nokia (ex. Alcatel-Lucent) 3HE00564CAA compatible
  • Nokia Siemens Networks V50017-U770-K500 compatible
  • Nokia-Siemens (ex. Atrica) AT10101 compatible
  • Packetlight SL101 compatible
  • Palo Alto Networks PAN-XFP-LR compatible
  • Radware 9062106 compatible
  • Ribbon (ex. ECI) OTR103_LR compatible
  • Ribbon (ex. ECI) OTR64_PI3 compatible
  • Transition Networks TN-XFP-LR compatible
Your vendor / compatibility is missing?

What customers say

Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore. The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that. As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
Thomas Verschuren Technical Consultant, IP Visie Networking B.V.
I have received my orders from them in blistering speed. Happy to the nth degree.
Pat Cluney  Senior Technical Officer, Waterford Institute of Technology

We use FLEXOPTIX modules for years with different networking hardware. Amazing and very stable products without any issues. Preparing a big network project with several switch vendors it was time to do the next step and order a FLEXBOX. Now we can be much more flexible that before and the provided tools are fast, stable, easy to use and as stable as all other FLEXOPTIX producs. All in all - highest recommendation!

Matthias Götz Managing Director / Blue Taurus GmbH & Co. KG

I have my own company, and I work as a network consultant for different customers, especially in the wind turbine business. I am often on turbine sites in the middle of the ocean, where I need a SFP of a certain type/vendor. By using the FLEXOPTIX FLEXBOX, I have solved a very big issue, just by having this tool and some FLEXOPTIX SFP`s in my bag. Then I can solve the issue, and get the site up and running immediately. This saves another trip to site (often by helicopter), and a lot of money and time. I am very exited about this product, and will certainly recommend this product to everybody.

Poul Pedersen Network consultant / Ipwork consult ApS
More