10G XFP, 50 GHz Grid - C-Band DWDM ZR with dual CDR 80 km / 23 dB, LC-Duplex

Universal XFP Transceiver - 50 GHz Grid - C-Band
Use FLEXBOX to configure to almost any vendor
DWDM for multiple applications over one duplex fiber
For 10GBASE-ZR Ethernet links
Supported Data Rates: 9.95 Gbit/s - 11.1 Gbit/s with dual CDR
Powerbudget of 23 dB for up to 80 km using an OS2 ITU-T G.652 fiber
Specs
  • DWDM 50 GHz
  • 80 km
  • 11.1 G
  • Dual CDR
Protocols
  • 10G ETH
  • 10G FC
  • OTU2
  • STM-64
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Part number
X.1696.23.yyy

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor XFP
Connector / Polish LC-Duplex PC
Interface DWDM
Compliance Code DWDM ZR
Distance 80 km
Temperature Range 0°C - 70°C
Bandwidth 9.95 Gbit/s - 11.1 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 3.5 W
CDR TX and RX
Inbuilt FEC No
Powerbudget (dB) 23 dB
Transmit min/max per lane 0 dBm / 4 dBm
Receiver min/max per lane -23 dBm / -10 dBm (overload) @10G
Wavelength TX (Typical) Channel 595 - 1529.94 nm
Wavelength RX (Range) 1520 - 1600 nm
Laser EML
Receiver Type APD
Modulation NRZ @10G
Transmit and Dispersion Penalty 2 dB
Extinction Ratio 8.2 dB
Supported Protocols 10G Ethernet, 10G FC, OTU2, STM-64

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard (Default) P.1696.23.595 compatible
Your vendor / compatibility is missing?

What customers say

The FLEXBOX is really a great tool. It allows me to quickly re-configure transceivers. Nice additional feature is the "Power Meter & Source" tool. It allows, without additional hardware, a quick check of optical transceivers, fiber cables, fiber connections etc.
René Oskar Kühne Retired scientist, now acting in the field of IT support, R.O. Kuehne

I have my own company, and I work as a network consultant for different customers, especially in the wind turbine business. I am often on turbine sites in the middle of the ocean, where I need a SFP of a certain type/vendor. By using the FLEXOPTIX FLEXBOX, I have solved a very big issue, just by having this tool and some FLEXOPTIX SFP`s in my bag. Then I can solve the issue, and get the site up and running immediately. This saves another trip to site (often by helicopter), and a lot of money and time. I am very exited about this product, and will certainly recommend this product to everybody.

Poul Pedersen Network consultant / Ipwork consult ApS
With the FLEXBOX we’re able to use our Transceivers universally in all kind of equipment and reduce the stock keeping significantly. Just awesome!
Christian Seitz Head of Network, STRATO AG
Spending a few minutes of my time, first and foremost expressing how much I’m impressed by your friendliness, is the least I can do. Friendliness was followed by super-fast order processing and delivery. In a few words, unboxing and using your Flexbox is an utterly awesome experience. As in brilliant. Also saving us loads of time ordering optics. In addition to all of this – you deliver particular good build quality, too. You’ve got me impressed, thank you!
Mark van den Berg CTO - Icera Networks
More