10G XFP, 100 GHz Grid - C-Band DWDM ZR with dual CDR 80 km / 23 dB, LC-Duplex

Universal XFP Transceiver - 100 GHz Grid - C-Band
Use FLEXBOX to configure to almost any vendor
DWDM for multiple applications over one duplex fiber
For 10GBASE-ZR Ethernet links
Supported Data Rates: 9.95 Gbit/s - 11.1 Gbit/s with dual CDR
Powerbudget of 23 dB for up to 80 km using an OS2 ITU-T G.652 fiber
Specs
  • DWDM 100 GHz
  • 80 km
  • 11.1 G
  • Dual CDR
Protocols
  • 10G ETH
  • 10G FC
  • OTU2
  • STM-64
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Part number
X.1696.23.yy
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor XFP
Connector / Polish LC-Duplex PC
Interface DWDM
Type DWDM ZR
Distance 80 km
Temperature Range 0°C - 70°C
Bandwidth 9.95 Gbit/s - 11.1 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 3.5 W
CDR TX and RX
Inbuilt FEC No
Powerbudget (dB) 23 dB
Transmit min/max per lane 0 dBm / 4 dBm
Receiver min/max per lane -23 dBm / -10 dBm (overload)
Wavelength TX (Typical) Channel 61 - 1528.77 nm
Wavelength RX (Range) 1520 - 1620 nm
Laser EML
Receiver Type APD
Modulation NRZ
Transmit and Dispersion Penalty 2 dB
Extinction Ratio 8.2 dB
Supported Protocols 10G Ethernet, 10G FC, OTU2, STM-64

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • MSA Standard (8G) compatible
  • ADTRAN 1442987G8C compatible
  • ADVA 1061701401-05 compatible
  • Arris 780244 compatible
  • Brocade / Ruckus 10G-XFP-ZRD-1538-77 compatible
  • Calix 100-01507 compatible
  • Ciena (ex. Nortel) NTK588AAE5 compatible
  • Cisco Systems XFP-10GZR-OC192LR compatible
  • Dell (ex. Force10) GP-XFP-W61 compatible
  • Ericsson RDH901011/61 compatible
  • Extreme (ex. Enterasys) 10GBASE-ZR-XFP compatible
  • Extreme 10261 compatible
  • Fujitsu FIM31063/120W61 compatible
  • HP H3C JD107A compatible
  • Huawei DWDM-XFP10G-1528-77 compatible
  • Huawei XFP-STM64-SM1550-80km compatible
  • Infinera (ex. Transmode) TRX100032/961 compatible
  • Infinera (ex. Transmode) TRX100083/961 compatible
  • Infinera TOM-10G-D61-LR2 compatible
  • Juniper (ex BTI Systems) BP3AM4LI compatible
  • Juniper XFP-10GE-ZR compatible
  • Marconi SU69EN compatible
  • MRV XFP-DWLR08-61 compatible
  • MRV XFP-DWLR08F8-61 compatible
  • Net Insight NPA0060-1961 compatible
  • Nokia (ex. Alcatel-Lucent) 1AB356630001 compatible
  • Nokia (ex. Alcatel-Lucent) 1AB375650001 compatible
  • Nokia (ex. Alcatel-Lucent) XFP-10G-DWDM-61 compatible
  • Nokia Siemens Networks V50017-U789-K500 compatible
  • Nortel / Juniper / NSN XFP-DWDM-23dB-C61 compatible
  • Packetlight UL100L-CH61 compatible
  • Ribbon (ex. ECI) OTR10_AL61 compatible
Your vendor / compatibility is missing?

What customers say

The SFP are exactly like promise on the web page, and the configuration tool is so amazing. I worked years with SFP and optical fiber and this tool is so great. It include a power meter an OTDR and allow to diagnose and configure the SFP for many vendors. It will help us in our research and also to manage our LAN. Thank you FLEXOPTIX
Sylvain Brisebois Advance Research, Senior Firmware Engineer, KINOVA
We use “FLEXBOX” and “FLEXOPTIX” for a few years now. Since then life is much easier. And even saved me sometimes in the middle of the night. Need a special vendor or type, plug it in, program, and done. Very… but very occasionally a compatibility is not present in the system. Just drop a e-mail to support with your needs to get an immediate response from “JIRA – the flexoptix robot” and your compatibility is added to your FLEXBOX within 24 hours. Just awesome!!
Nick Derksen Infrastructure Engineer, Previder B.V
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore. The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that. As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
Thomas Verschuren Technical Consultant, IP Visie Networking B.V.
Everything is build for and runs in the cloud today, the Aviatrix Multicloud solution as well. Still, we have customers asking for a highperformance encryption from “their” premises to the cloud and this is where our CloudN appliances come into play. If customers ask us to support the installation of our appliances, we’ll do everything we can to help. And then it’s good to know that if you sneak into a datacenter, you can rely on FLEXOPTIX to even fulfil that connection(s) that are terminating on a device that was missing or has changed in the architecture you discussed before. Thanks for the brilliant service!
Gerald Buchholz / Principal Solution Architect Aviatrix
More