10G XFP Multirate Tunable DWDM ZR with dual CDR 80 km, 97 Channels, 50GHz Grid, C-Band, LC-Duplex, Singlemode
- DWDM 50GHz
- 80 km
- 11.35 G
- Tunable
- 10G ETH
- 10G FC
- STM-64
-
Matching Products
-
Matching Products
Specification
Form Factor | XFP |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | Singlemode DWDM 50GHz |
Compliance Code | ZR |
Distance | 80 km |
Temperature Range | -5°C - 70°C |
Bandwidth | 9.95 Gbit/s - 11.35 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
Power Consumption | 2.5 W |
CDR | TX and RX |
---|---|
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 25 dB |
Transmit min/max per lane | -1 dBm / 3 dBm |
Receiver min/max per lane | -26 dBm / -4 dBm (overload) @10G |
Wavelength TX (Typical) | tunable DWDM 50GHz |
TX Tunable Range | 1528.77 - 1567.13 nm |
Wavelength RX (Range) | 1525 - 1575 nm |
Laser | ILMZ |
---|---|
Receiver Type | APD |
Modulation | NRZ @10G |
Transmit and Dispersion Penalty | 3 dB |
Chromatic Dispersion Tolerance | 0 ps/nm to 1,600 ps/nm @10G |
Extinction Ratio | 9.5 dB |
Supported Protocols | 10G Ethernet, 10G FC, STM-64 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADTRAN 1442985G1C compatible
- ADVA 1061701400-01 compatible
- Brocade / Ruckus 10G-XFP-ZR compatible
- Ciena (ex. Nortel) NTK583AAE6 compatible
- Ciena 160-9004-900 compatible
- Cisco Systems DWDM-XFP-C compatible
- Cisco Systems ONS-XC-10G-C compatible
- Ericsson RDH102150/02 compatible
- Extreme (ex. Enterasys) 10GBASE-ZR-XFP compatible
- Extreme 10200 compatible
- Huawei XFP-STM64-T-80km compatible
- Infinera (ex. Transmode) TRX100090/TC compatible
- Infinera TOM-10G-DT-LR2 compatible
- Juniper (ex BTI Systems) BP3AM4TF compatible
- Juniper EX-XFP-10GE80KDWDM compatible
- Juniper XFP-10G-CBAND-T50-ZR compatible
- MRV XFP-DWLR08TC compatible
- Net Insight NPA0038-LR21 compatible
- Nokia (ex. Alcatel-Lucent) 1AB375650046 compatible
- Nokia Networks V50017-U790-K500 compatible
- Nokia Siemens Networks V50017-U792-K500 compatible
- Packetlight UL-TU-FC-80 compatible
- Ribbon (ex. ECI) OTR10T_AL compatible
- Ribbon (ex. ECI) OTRN10_AL20 compatible
- Sorrento Networks GMXFP-10G-40CT-80 compatible
What customers say
I have my own company, and I work as a network consultant for different customers, especially in the wind turbine business. I am often on turbine sites in the middle of the ocean, where I need a SFP of a certain type/vendor. By using the FLEXOPTIX FLEXBOX, I have solved a very big issue, just by having this tool and some FLEXOPTIX SFP`s in my bag. Then I can solve the issue, and get the site up and running immediately. This saves another trip to site (often by helicopter), and a lot of money and time. I am very exited about this product, and will certainly recommend this product to everybody.