10G XFP CWDM ER with dual CDR Industrial ~30 km / 14 dB, 1470 nm - 1610 nm, LC-Duplex
- CWDM
- ~30 km / 14 dB
- 11.1 G
- Dual CDR
- 10G ETH
- 10G FC
- 8G FC
- OTU2
- STM-64
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | XFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | CWDM |
| Compliance Code | CWDM ER |
| Distance | 40 km |
| Temperature Range | -40°C - 85°C |
| Bandwidth | 8.5 Gbit/s - 11.1 Gbit/s |
| Digital Diagnostic Management (DDM) | Internally Calibrated |
| Power Consumption | 3.5 W |
|---|---|
| CDR | TX and RX |
| Inbuilt FEC | No |
| Powerbudget (dB) | 14 dB |
| Transmit min/max per lane | -1 dBm / 4.4 dBm |
| Receiver min/max per lane | -15 dBm / 0.5 dBm (overload) @10G |
| Wavelength TX (Typical) | Channel R - 1610 nm |
| Wavelength RX (Range) | 1260 - 1620 nm |
| Laser | EML |
|---|---|
| Receiver Type | PIN |
| Modulation | NRZ @10G |
| Transmit and Dispersion Penalty | 2.5 dB |
| Extinction Ratio | 8.2 dB |
| Supported Protocols | 10G Ethernet, 10G FC, 8G Fibre Channel, OTU2, STM-64 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
The flexbox has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the flexbox was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.
Looking forward to keep using the flexbox in the future! :)
When you unpack it, you immediately notice: A lot of time and love was invested in this great device. In just a few minutes everything is ready to go and the first transceiver can be configured. The app responds quickly and is well laid out, and the search function makes it easy to find the right configuration. The Flexbox is ideal for us because we use switches from many different manufacturers and can thus react flexibly to changes in our infrastructure at any time. Even on site, we can make adjustments at an instant thanks to the support for mobile devices for configuration.
I have my own company, and I work as a network consultant for different customers, especially in the wind turbine business. I am often on turbine sites in the middle of the ocean, where I need a SFP of a certain type/vendor. By using the FLEXOPTIX FLEXBOX, I have solved a very big issue, just by having this tool and some FLEXOPTIX SFP`s in my bag. Then I can solve the issue, and get the site up and running immediately. This saves another trip to site (often by helicopter), and a lot of money and time. I am very exited about this product, and will certainly recommend this product to everybody.