10G XFP CWDM LR with dual CDR ~10 km / 10 dB, 1270 nm - 1610 nm, LC-Duplex
Universal XFP Transceiver - CWDM
Use FLEXBOX to configure to almost any vendor
CWDM for multiple applications over one duplex fiber
For 10GBASE-LR Ethernet links
Supported Data Rates: 8.5 Gbit/s - 11.1 Gbit/s with dual CDR
Powerbudget of 10 dB for up to 10 km using an OS2 ITU-T G.652 fiber
Specs
- CWDM
- ~10 km / 10 dB
- 11.1 G
- Dual CDR
Protocols
- 10G ETH
- 10G FC
- 8G FC
- OTU2
- STM-64
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | XFP |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | CWDM |
Compliance Code | CWDM LR |
Distance | 10 km |
Temperature Range | -5°C - 70°C |
Bandwidth | 8.5 Gbit/s - 11.1 Gbit/s |
Digital Diagnostic Management (DDM) | Internally Calibrated |
Power Consumption | 3.5 W |
---|---|
CDR | TX and RX |
Inbuilt FEC | No |
Powerbudget (dB) | 10 dB |
Transmit min/max per lane | -5 dBm / 0 dBm |
Receiver min/max per lane | -15 dBm / 0.5 dBm (overload) @10G |
Wavelength TX (Typical) | Channel R - 1610 nm |
Wavelength RX (Range) | 1260 - 1620 nm |
Laser | DFB |
---|---|
Receiver Type | PIN |
Modulation | NRZ @10G |
Transmit and Dispersion Penalty | 2 dB |
Extinction Ratio | 3.5 dB |
Supported Protocols | 10G Ethernet, 10G FC, 8G Fibre Channel, OTU2, STM-64 |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- MSA Standard (8G) compatible
- ADTRAN 1442971G1 compatible
- Alcatel-Lucent Ent. 10G-XFP-LR compatible
- Allied Telesis AT-XPLR compatible
- Arris 718887 compatible
- Avaya (ex. Nortel) AA1403001-E5 compatible
- Brocade / Ruckus 10G-XFP-LR compatible
- Ciena (ex. Nortel) NTTP84HH compatible
- Cisco Systems XFP-10GLR-OC192SR compatible
- Dell (ex. Force10) GP-XFP-1L compatible
- Ericsson RDH102140/01 compatible
- Extreme (ex. Enterasys) 10GBASE-LR-XFP compatible
- Extreme 10122 compatible
- H3C (ex. 3COM) 3CXFP92 compatible
- Hirschmann M-XFP-LR/LC compatible
- Hitachi 10GBASE-LR compatible
- HP H3C JD108B compatible
- Huawei XFP-STM64-LH40-SM1610 compatible
- Juniper (ex BTI Systems) BP3AM4MS compatible
- Juniper XFP-10GE-LR compatible
- MRV XFP-10GCWER-61 compatible
- Net Insight NPA0073-1610 compatible
- Nortel / Juniper / NSN XFP-CWDM-10dB-1610 compatible
- Ribbon (ex. ECI) OTR64_PI3 compatible
- Transition Networks TN-XFP-LR1-C61 compatible
- Zyxel XFP-LR compatible
Your vendor / compatibility is missing?
What customers say
Woa, i can get next day delivery for any vendor. That’s a game changer. Also thanks for making it a smartphone app, this fits my workflow well.
Arvid Picciani
CEO / devguard GmbH
Spending a few minutes of my time, first and foremost expressing how much I’m impressed by your friendliness, is the least I can do. Friendliness was followed by super-fast order processing and delivery. In a few words, unboxing and using your Flexbox is an utterly awesome experience. As in brilliant. Also saving us loads of time ordering optics. In addition to all of this – you deliver particular good build quality, too. You’ve got me impressed, thank you!
Mark van den Berg
CTO - Icera Networks
Using FLEXBOX and FLEXOPTIX transceivers mean for us Flexibility. We don’t use so much transceivers but we work with different brands each day.
With a small amount in stock we can configure them with the right specifications for each use. Assuring it will perfectly fit the requirements of our equipments and costs are also reduced considerably.
Setting up either the FLEXBOX and a transceiver on a computer or through the mobile app is just easy as 1,2,3. It tooks us less than 15 minutes between unboxing and using a transceiver.
We really appreciate the mobile option so we can have the FLEXBOX in one hand, a transceiver in the other one and the phone with the app in the pocket for programming on the field.
Thanks FLEXOPTIX for this really useful tool and for extending supported vendors in the future.
Christophe Mulkers
CEO/CTO, Oufti Connections
The FLEXBOX is the best thing since sliced bread!
Stefan Ideler
CTO, i3D.net