1000BASE-T Copper SFP 100 m, RJ-45, Autoneg, Preferred Master, RX_LOS, SGMII, 12 Mbit/s - 1.25 Gbit/s
SFP
T
Universal Copper SFP Transceiver
Use FLEXBOX to configure to almost any vendor
Leverage SGMII to support Fast Ethernet on 1 Gigabit devices
Supported Data Rates: 12.5 Mbit/s - 1.25 Gbit/s
Up to 100 m via CAT5e Cable
RJ-45 connector
Specs
- Copper
- 100 m
- 1.25 G
Protocols
- 100M ETH
- 10M ETH
- 1G ETH
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | RJ-45 |
| Interface | Copper |
| Compliance Code | T |
| Distance | 100 m |
|---|---|
| Temperature Range | 0°C - 70°C |
| Bandwidth | 12.5 Mbit/s - 1.25 Gbit/s |
| Digital Diagnostic Management (DDM) | not implemented |
| Power Consumption | 1.06 W |
|---|---|
| Supported Protocols | Ethernet, Fast Ethernet, Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- MSA Standard (Default) FCLF8521P2BTL compatible
- MikroTik S-RJ01 compatible
- Nokia (ex. Alcatel-Lucent) 3FE64927AA compatible
Your vendor / compatibility is missing?
What customers say
It's just a genius device. So easy to use and simple! I would recommend it to every network engineer. Plug-in the module, program and its ready for deployment!
David Schoefberger
Schoefberger
Using FLEXBOX and FLEXOPTIX transceivers mean for us Flexibility. We don’t use so much transceivers but we work with different brands each day.
With a small amount in stock we can configure them with the right specifications for each use. Assuring it will perfectly fit the requirements of our equipments and costs are also reduced considerably.
Setting up either the FLEXBOX and a transceiver on a computer or through the mobile app is just easy as 1,2,3. It tooks us less than 15 minutes between unboxing and using a transceiver.
We really appreciate the mobile option so we can have the FLEXBOX in one hand, a transceiver in the other one and the phone with the app in the pocket for programming on the field.
Thanks FLEXOPTIX for this really useful tool and for extending supported vendors in the future.
Christophe Mulkers
CEO/CTO, Oufti Connections
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore.
The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that.
As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
Thomas Verschuren
Technical Consultant, IP Visie Networking B.V.
I personally did not know FLEXOPTIX yet, but since I got in contact with it the first time, I do not want to miss it anymore. Very good product. I like the ability to program them to vendor specific SFPs which are recognized as they would be original ones. If the hardware behind changes I can simply change the SFPs to new vendor specific ones.
Thank you for such a great product.
Stefan Kirbes
System Administrator / INTERCOM Austria GmbH