100BASE-TX Copper SFP 100 m, RJ-45, Autoneg, RX_LOS, SERDES, 10 Mbit/s - 125 Mbit/s

Universal Copper SFP Transceiver
Use FLEXBOX to configure to almost any vendor
Supported Data Rates: 10 Mbit/s - 125 Mbit/s
Up to 100 m via CAT5e Cable
RJ-45 connector
Specs
  • Copper
  • 100 m
  • 125 M
Protocols
  • 100M ETH
  • 10M ETH
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
T.C03.02.E:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

Higher Temperature Range
100BASE-TX Industrial Copper SFP 100 m, RJ-45, Autoneg, RX_LOS, SERDES, 10 Mbit/s - 125 Mbit/s 
100BASE-TX Industrial Copper SFP | 100 m, RJ-45, Autoneg, RX_LOS, SERDES, 10 Mbit/s - 125 Mbit/s
109 pcs in stock As low as 69.13 EUR

Specification

Form Factor SFP
Connector / Polish RJ-45
Interface Copper
Compliance Code T
Distance 100 m
Temperature Range 0°C - 70°C
Bandwidth 10 Mbit/s - 125 Mbit/s
Digital Diagnostic Management (DDM) not implemented
Power Consumption 1.05 W
Supported Protocols Ethernet, Fast Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • Cisco Systems GLC-FE-T-I compatible
  • Hirschmann M-FAST SFP-TX compatible
  • Moxa SFP-1FEMLC-T compatible
  • Nokia (ex. Alcatel-Lucent) 3FE63343AA compatible
  • Nokia-Siemens (ex. Atrica) [100TX] compatible
  • Planet MFB-FX compatible
  • Riverstone SFPFX-09 compatible
  • Westermo 1100-0172 compatible
  • Zyxel SFP-100T compatible
Your vendor / compatibility is missing?

What customers say

The FLEXBOX is the best thing since sliced bread!
Stefan Ideler CTO, i3D.net
The FLEXBOX allows us to use 100MBit/s to multi-gigabit transceivers in our product for a wide range of customer needs. We can not solve them without this magic box!
Klaus Degner Managing Director, Allegro Packets GmbH

FLEXOPTIX have saved us from the misery and disappointment of searching in vain through our box of old, single-vendor transceivers when we need to connect up a device, only to find we don’t have a compatible module. Having the FLEXBOX and programmable transceivers in our toolbox means we’ve always got the right transceiver for any device.  The icing on the cake is the mobility pack which allows you to program any transceivers, anywhere, any time, with just a mobile phone and the FLEXBOX .  Absolutely brilliant and couldn't ask for more.

Stuart Willson Infrastructure Engineer/ Surrey Satellite Technology Limited

The flexbox has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the flexbox was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.

Looking forward to keep using the flexbox in the future! :)

Stan van de Klippe Chief Executive Officer-royalehosting.net
More