1G SFP ZX+ 160 km, λ1550 nm, DDM, LC-Duplex, Singlemode
- 1550 nm
- 160 km
- 1.25 G
- 1G ETH
- 1G FC
-
Alternativen
-
Passende Produkte
-
Alternativen
-
Passende Produkte
Spezifikation
Form Factor | SFP |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | Singlemode |
Compliance Code | ZX+ |
Distance | 160 km |
Temperature Range | 0°C - 70°C |
Bandwidth | 1 Gbit/s - 1.25 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, externally calibrated |
Power Consumption | 1 W |
CDR | none |
---|---|
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 40 dB |
Transmit min/max per lane | 3 dBm / 7 dBm |
Receiver min/max per lane | -37 dBm / -10 dBm (overload) @1G |
Wavelength TX (Typical) | 1550 nm |
Wavelength TX (Range) | 1500 - 1580 nm |
Wavelength RX (Typical) | 1550 nm |
Wavelength RX (Range) | 1260 - 1600 nm |
---|---|
Laser | DFB |
Receiver Type | APD |
Modulation | NRZ @1G |
Transmit and Dispersion Penalty | 1 dB |
Extinction Ratio | 9 dB |
Supported Protocols | 1G Fibre Channel, Gigabit Ethernet |
TRANSCEIVER KONFIGURATION MIT DER FLEXBOX
SO EINFACH GEHT'S!- Lade unsere App herunter und starte sie: FLEXOPTIX App
- Connect your FLEXBOX via USB
- Stecke einen Universal Transceiver ein
- Suche dir einfach Hersteller und Kompatibilität aus
- Drücke Play
- Die Konfiguration dauert nur ein paar Sekunden
- Benutze den Transceiver in deinem Gerät. Das war's!
- Du brauchst ihn für ein anderes Gerät? - Rekonfiguriere ihn einfach immer wieder
Kompatibiltät
Alle zitierten Marken, eingetragenen Unternehmen und Referenzen sind das alleinige Eigentum der jeweiligen Unternehmen und werden ausschließlich zur Identifizierung der Produkte verwendet.
- MSA Standard kompatibel
- A10networks # 11646 kompatibel
- Accedian Networks 7SS-000 kompatibel
- ADVA 0061003011 kompatibel
- Allied Telesis # 11649 kompatibel
- Arista 3rd_Party SFP-1G-LX kompatibel
- Arista SFP-1G-LX kompatibel
- Avaya (ex. Nortel) AA1419052-E6 kompatibel
- Blackbox LFP414 kompatibel
- Brocade # 11652 kompatibel
- Check Point # 11654 kompatibel
- Ciena (ex. Nortel) # 11655 kompatibel
- Cisco Systems GLC-ZX-SMD kompatibel
- D-LINK # 11657 kompatibel
- Dell # 11656 kompatibel
- Dell (ex. Force10) # 11664 kompatibel
- Extreme (ex. Enterasys) # 11659 kompatibel
- Extreme 10053 kompatibel
- F5 Networks # 11661 kompatibel
- FibroLAN SF1G-LX5 kompatibel
- Fluke Networks # 11663 kompatibel
- Fortinet FR-TRAN-ZX kompatibel
- Fujitsu # 11666 kompatibel
- H3C (ex. 3COM) # 11645 kompatibel
- Hirschmann # 11667 kompatibel
- HP H3C JD103A kompatibel
- Huawei eSFP-GE-ZX100-SM1550 kompatibel
- Infinera (ex. Transmode) TRX100027 [ZX] kompatibel
- Intel # 11671 kompatibel
- Juniper (ex BTI Systems) # 11653 kompatibel
- Juniper EX-SFP-1GE-LX40K kompatibel
- Keymile 37973029 kompatibel
- Keysight (ex. Ixia) SM1310 kompatibel
- KTI Networks # 11673 kompatibel
- LANCOM # 11674 kompatibel
- Lenovo (ex. Blade Network) # 11670 kompatibel
- LevelOne # 11675 kompatibel
- MikroTik S-55DLC80D kompatibel
- Moxa # 11677 kompatibel
- MRV # 11678 kompatibel
- Netgear # 11679 kompatibel
- NetOptics SFPKT-LX kompatibel
- Nokia (ex. Alcatel-Lucent) 3HE01389CA kompatibel
- Nokia Siemens Networks # 11680 kompatibel
- Palo Alto Networks # 11682 kompatibel
- Planet MGB-L120 kompatibel
- Radware # 11683 kompatibel
- Ribbon (ex. ECI) # 11658 kompatibel
- Telco Systems BTI-MGBIC-ELH-DD-LC kompatibel
- TP-LINK # 11684 kompatibel
- Transition Networks TN-SFP-LX16 kompatibel
- Waystream (ex. Packetfront) # 11681 kompatibel
- Westermo 1100-0171+ kompatibel
Was Kunden sagen
Durch Dritte sind wir auf das Produkt aufmerksam gemacht geworden und aufgrund der positiven Rückmeldungen haben wir es nun auch entschlossen auf die Lösung zu setzen. Von daher haben wir die nächste SFP+-Bestellung bei FLEXOPTIX ausgelöst und siehe da, es wurde nicht zu wenig versprochen. Von der Auswahl der Produkte, über Rückfragen und Lieferung, alles problemlos und schnell.
Auch das Design bis zum Handling alles super, vor allem die Konfiguration über Smartphones ist mega einfach und intuitiv! Aufgrund der verschiedensten Hersteller in unserer Infrastruktur, müssen wir jetzt nicht mehr experimentieren, welches SFP wo vielleicht funktioniert