40G QSFP+ LR4 10 km, λ1271-1331 nm, LC-Duplex, Singlemode

Universal QSFP+ Transceiver
Use FLEXBOX to configure to almost any vendor
For 40GBASE-LR4 Ethernet links
Supported Data Rates: 41.2 Gbit/s
Up to 10 km via Singlemode OS2
LC-Duplex Connector
Specs
  • int. Mux
  • 10 km
  • 41.2 G
  • LC
Protocols
  • 10G ETH
  • 40G ETH
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
Q.1640G.10:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

  • Matching Products

Higher Power Budget
40G QSFP+ LR4 20 km, λ1271-1331 nm, LC-Duplex, Singlemode 
40G QSFP+ LR4 | 20 km, λ1271-1331 nm, LC-Duplex, Singlemode
279 pcs in stock As low as 460.85 EUR
LWL Fibre Cleaner LC / Belt clip edition  
LWL Fibre Cleaner LC / Belt clip edition
29 pcs in stock 94.05 EUR
LC-Duplex to LC-Duplex Singlemode cable A1 9/125 µm, yellow, 0.25 m - 100 m 
LC-Duplex to LC-Duplex Singlemode cable | A1 9/125 µm, yellow, 0.25 m - 100 m
As low as 12.20 EUR

Specification

Form Factor QSFP+
Connector / Polish LC-Duplex PC
Interface Singlemode
Compliance Code LR4
Distance 10 km
Temperature Range 0°C - 70°C
Lane Count 4x (Tx/Rx)
Bandwidth 41.2 Gbit/s
Bandwith Per Lane 10.3 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 3.5 W
CDR none
SGMII No
Inbuilt FEC No
Powerbudget (dB) 4.5 dB
Transmit min/max per lane -7 dBm / 2.3 dBm
Receiver min/max per lane -11.5 dBm / 2.3 dBm (overload) @40G
Wavelength TX (Typical) 1271 nm, 1291 nm, 1311 nm, 1331 nm
Wavelength RX (Typical) 1271 nm, 1291 nm, 1311 nm, 1331 nm
Laser DFB
Receiver Type PIN
Modulation NRZ @40G
Transmit and Dispersion Penalty 2.6 dB
Extinction Ratio 3.5 dB
Supported Protocols 40G Ethernet, 10G Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • ADTRAN 1445500F2C compatible
  • Alcatel-Lucent Ent. QSFP-40G-LR compatible
  • Allied Telesis AT-QSFPLR4 compatible
  • Arista 3rd_Party QSFP-40G-LR4 compatible
  • Arista QSFP-40G-LR4 compatible
  • Aruba Networks JH232A compatible
  • Avaya (ex. Nortel) AA1404001-E6 compatible
  • Axon QSFP+ LR4 compatible
  • Bittware QSFP+ LR4 compatible
  • Brocade 40G-QSFP-LR4 compatible
  • Check Point CPAC-TR-40LR-QSFP-10KM compatible
  • Chelsio SM40G-LR compatible
  • Ciena 160-9501-900 compatible
  • Cisco (ex. Meraki) MA-QSFP-40G-LR4 compatible
  • Cisco Systems QSFP-40G-LR4 compatible
  • Cisco Systems QSFP-40G-LR4-S compatible
  • Cumulus Networks QSFP+ LR4 compatible
  • Dell (ex. Force10) GP-QSFP-40GE-1LR compatible
  • Dell 407-BBGL compatible
  • Dell 407-BBGN compatible
  • Edge Core QSFP+ LR4 compatible
  • Extreme (ex. Enterasys) 40GB-LR4-QSFP compatible
  • Extreme 10320 compatible
  • F5 Networks OPT-0030 compatible
  • Fluke Networks VX_00017 compatible
  • Fortinet FG-TRAN-QSFP+LR compatible
  • Gigamon QSF-503 compatible
  • Grassvalley QSFP+ LR4 compatible
  • HP H3C JG661A compatible
  • Huawei QSFP-40G-LR4 compatible
  • Juniper JNP-QSFP-40G-LR4 compatible
  • Juniper QSFPP-40GBASE-LR4 compatible
  • Juniper SRX-QSFP-40G-LR4 compatible
  • Keymile QSFP+ LR4 compatible
  • Keysight (ex. Ixia) QLR4-PLUS compatible
  • Lenovo (ex. Blade Network) 00D6222 compatible
  • MikroTik Q+85MP01D compatible
  • MRV QSFP-40G-LR compatible
  • napatech 802-0082-01-10 compatible
  • Netgear AXLM762 compatible
  • NetOptics QSFP+KT-LR compatible
  • Netscout 321-1659 compatible
  • Nokia (ex. Alcatel-Lucent) 3FE46362AA compatible
  • Nokia (ex. Alcatel-Lucent) 3HE06485AA compatible
  • Nvidia (ex. Mellanox) MC2210511-LR4 compatible
  • Packetlight QSFP+-LR-1102 compatible
  • Palo Alto Networks PAN-QSFP-40GBASE-LR4 compatible
  • Planet QSFP-40G-LR4 compatible
  • Pure Storage FA-40Gb-Eth-SFP-LR compatible
  • Quanta QSFP+ LR4 compatible
  • RAD QSFPP-1D compatible
  • Radware 9062216 compatible
  • Ribbon (ex. ECI) OTP40_LR4 compatible
  • Solarflare QSFP+ LR4 compatible
  • SonicWALL QSFP+ LR4 compatible
  • Spirent ACC-6077A compatible
  • Stormshield NA-TRANS-QSFP40-LR compatible
  • Telco Systems BTI-40GLR-DD-QSFP compatible
  • Trend Micro (ex. TippingPoint) TPNN0327 compatible
Your vendor / compatibility is missing?

What customers say

Before we knew FLEXOPTIX, we always stocked various types of transceivers from different brands. Now, several years later, we have completely switched to FLEXOPTIX's universal transceivers since we can simply brand these ourselves using the FLEXBOX. Along with their broad product range and very fast shipping, they are an awesome company to deal with!
Jeffrey Bosma XS News , Sr. System & Network Engineer
Everything is build for and runs in the cloud today, the Aviatrix Multicloud solution as well. Still, we have customers asking for a highperformance encryption from “their” premises to the cloud and this is where our CloudN appliances come into play. If customers ask us to support the installation of our appliances, we’ll do everything we can to help. And then it’s good to know that if you sneak into a datacenter, you can rely on FLEXOPTIX to even fulfil that connection(s) that are terminating on a device that was missing or has changed in the architecture you discussed before. Thanks for the brilliant service!
Gerald Buchholz / Principal Solution Architect Aviatrix

What a great product! FLEXBOX is an incredible help to our organisation that has a zoo of vendors and manufacturers in our data center. It is super easy to use and we can rapidly get a transceiver ready for any of our hardware. Q: How to improve the experience of setting up transceivers in a multivendor environment? A: FLEXBOX.

Pavel Sagulenko Head of IT Infrastructure / appliedAI Initiative GmbH
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore. The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that. As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
Thomas Verschuren Technical Consultant, IP Visie Networking B.V.
More